Free shipping over 499 SAR
Shipping (WYISWYG)

TECO TK-500 Aquarium Chiller

Available: Out Of stock

2875 SAR

EFFICIENT COOLING TECHNOLOGY

Internationally-recognized high-end compressors and titanium coaxial heat exchangers provide high performance, low energy consumption and low noise levels.

BUILT-IN HEATER

The TANK® TK-500 comes standard with a heater built into the unit (previously, had to be purchased and installed separately). The built-in heater provides better control over water temperatures and can be operated through the digital thermostat.

DIGITAL THERMOSTAT

Intuitive controller with accurate temperature detection from 32 to 95°F. Closed loop temperature control system with extremely tight differential of 1°F. Displays in °F or °C, and audible alarms for certain situations.

EFFICIENT DESIGN

Solid and durable structure designed to guarantee near perfect protection against corrosion. Rotatable in-set water connections, rotatable exhaust conveyor, and smaller form-factor helps facilitate placement of chiller in confined spaces.

Cooling Performance

Ability of the TANK TK-500 to pull down water temperatures in an 86°F room:

AQUARIUM SIZE TEMP. ATTAINABLE HEATING LOAD NET PULL-DOWN C.O.P.*
130 gallons 77°F  from 86°F 1.89 watts/gal. 9°F cooler 2.0
* Coefficient of Performance (COP) - a numerical value that represents cooling performance from a baseline room temperature of 86°F and a typical heat source (aka. Heating Load

Technical Specifications

Recommended Aquarium Size   up to 120 gallons
Horsepower   1/6 HP
Maximum Pressure   8.7 psi
Minimum Flow Rate   106 gallons per hour
Maximum Flow Rate   211 gallons per hour
In/Out Water Connection   5/8" tube diameter
Exchanger   titanium
Supply   120V-60Hz
Power Consumption   225 Watts
Gas/Refrigerant   R134a
Minimum Set Point   41°F
Maximum Set Point   95°F
Weight   36.4 lbs. (16.5 kg)
Dimensions   12.2" x 12.2" x 16.38"